injection moulding cost Archives - China Plastic Mould Manufacturer,Injection Mould Designing and Making-Mingyu

Manufacturing method of silicon rubber mould

Post author:mingyu
Post published:March 15, 2020
Post category:Injection molding

Rubber mold is the simplest method in rapid mold. Generally, the RP prototype is re-molded with silicone, but the life is very short, only about 10-30 pieces! It has very…

Powder injection molding process

Post author:mingyu
Post published:March 9, 2020
Post category:Injection molding

Powder injection molding (PIM), including metal injection molding (MIM) and ceramic injection molding (CIM), is an advanced molding technology that can produce a large number of shape components from powder.…

Damage status and maintenance measures of injection mold

Post author:mingyu
Post published:February 21, 2020
Post category:Mould Knowledge

The injection mold should test the various properties of the mold under the normal operation of the injection molding machine and measure the size of the final molded plastic part.…

Gas assisted injection molding

Post author:mingyu
Post published:December 30, 2019
Post category:Injection molding

What's gas assisted injection molding? Gas-assisted injection molding (GAM or GAIM) refers to injecting inert high-pressure nitrogen when the plastic material is filled into the mold cavity (filling like 75%…

injection mold design points

Post author:mingyu
Post published:August 5, 2019
Post category:Mould Knowledge

composition of Runner system of injection mold Runner system of injection mold is also named sprue system. it is the necessary passage for the melt material from the nozzle of…

Auto parts mould testing

Post author:mingyu
Post published:July 13, 2019
Post category:mould video

Car interior strip mould testing Auto parts mould, Automobile parts mould, Car parts mold, automotive parts mould testing video https://youtu.be/f0Yjgk4vDzc

mould temperature

Post author:mingyu
Post published:July 12, 2019
Post category:Mould Knowledge

what's mould temperature? The mould temperature refers to the temperature of the surface of the cavity when the forming is performed. It is important to maintain the proper temperature and…

PE material injection molding

Post author:mingyu
Post published:July 4, 2019
Post category:Injection molding

what's PE material? PE is a crystalline raw material and has extremely low hygroscopicity of not more than 0.01%, so that it is not required to be dried before processing.…

factors affecting the quality of injection molds

Post author:mingyu
Post published:June 25, 2019
Post category:Mould Knowledge

Mold manufacturing is a complicated process. From the steps of design, processing, assembly, debugging, etc., to the final use, there are mainly 10 factors that affect the quality of mold.…

Injection mold maintenance

Post author:mingyu
Post published:May 17, 2019
Post category:Mould Knowledge

Compared with other molds, the injection mold is more complicated and precise, and the requirements for operation and maintenance of the product are higher. Therefore, in the whole production process,…